Active site rearrangement and structural divergence in prokaryotic respiratory oxidases.

Cytochrome bd-type quinol oxidases catalyze the reduction of molecular oxygen to water in the respiratory chain of many human-pathogenic bacteria. They are structurally unrelated to mitochondrial cytochrome c oxidases and are therefore a prime target for the development of antimicrobial drugs. We determined the structure of the Escherichia coli cytochrome bd-I oxidase by single-particle cryo-electron microscopy to a resolution of 2.7 angstroms. Our structure contains a previously unknown accessory subunit CydH, the L-subfamily-specific Q-loop domain, a structural ubiquinone-8 cofactor, an active-site density interpreted as dioxygen, distinct water-filled proton channels, and an oxygen-conducting pathway. Comparison with another cytochrome bd oxidase reveals structural divergence in the family, including rearrangement of high-spin hemes and conformational adaption of a transmembrane helix to generate a distinct oxygen-binding site.

In-focus electron microscopy of frozen-hydrated biological samples with a Boersch phase plate.

We report the implementation of an electrostatic Einzel lens (Boersch) phase plate in a prototype transmission electron microscope dedicated to aberration-corrected cryo-EM. The combination of phase plate, C(s) corrector and Diffraction Magnification Unit (DMU) as a new electron-optical element ensures minimal information loss due to obstruction by the phase plate and enables in-focus phase contrast imaging of large macromolecular assemblies. As no defocussing is necessary and the spherical aberration is corrected, maximal, non-oscillating phase contrast transfer can be achieved up to the information limit of the instrument. A microchip produced by a scalable micro-fabrication process has 10 phase plates, which are positioned in a conjugate, magnified diffraction plane generated by the DMU. Phase plates remained fully functional for weeks or months. The large distance between phase plate and the cryo sample permits the use of an effective anti-contaminator, resulting in ice contamination rates of <0.6 nm/h at the specimen. Maximal in-focus phase contrast was obtained by applying voltages between 80 and 700 mV to the phase plate electrode. The phase plate allows for in-focus imaging of biological objects with a signal-to-noise of 5-10 at a resolution of 2-3 nm, as demonstrated for frozen-hydrated virus particles and purple membrane at liquid-nitrogen temperature.

Amphipols from A to Z.

Amphipols (APols) are short amphipathic polymers that can substitute for detergents to keep integral membrane proteins (MPs) water soluble. In this review, we discuss their structure and solution behavior; the way they associate with MPs; and the structure, dynamics, and solution properties of the resulting complexes. All MPs tested to date form water-soluble complexes with APols, and their biochemical stability is in general greatly improved compared with MPs in detergent solutions. The functionality and ligand-binding properties of APol-trapped MPs are reviewed, and the mechanisms by which APols stabilize MPs are discussed. Applications of APols include MP folding and cell-free synthesis, structural studies by NMR, electron microscopy and X-ray diffraction, APol-mediated immobilization of MPs onto solid supports, proteomics, delivery of MPs to preexisting membranes, and vaccine formulation.

Infrared spectroscopic study of the structural and functional properties of the Na(+)/H(+) antiporter MjNhaP1 from Methanococcus jannaschii.

In this study, structural, functional, and mechanistic properties of the Na(+)/H(+) antiporter MjNhaP1 from Methanococcus jannaschii were analyzed by infrared spectroscopic techniques. Na(+)/H(+) antiporters are generally responsible for the regulation of cytoplasmic pH and Na(+) concentration. MjNhaP1 is active in the pH range between pH 6 and pH 6.5; below and above it is inactive. The secondary structure analysis on the basis of ATR-IR spectra provides the first insights into the structural changes between inactive (pH 8) and active (pH 6) state of MjNhaP1. It results in decreased ordered structural elements with increasing the pH-value i.e. with inactivation of the protein. Analysis of temperature-dependent FTIR spectra indicates that MjNhaP1 in the active state exhibits a much higher unfolding temperature in the spectral region assigned to alpha-helical segments. In contrast, the temperature-induced structural changes for beta-sheet structure are similar for inactive and active state. Consequently, this structure element is not the part of the activation region of the protein. The surface accessibility of the protein was analyzed by following the extent of H/D exchange. Due to higher content of unordered structural elements a higher accessibility for amide protons is observed for the inactive as compared to the active state of MjNhaP1. Altogether, the results present the active state of MjNhaP1 as the state with ordered structural elements which exhibit high thermal stability and increased hydrophobicity.

Projection structure and oligomeric state of the osmoregulated sodium/glycine betaine symporter BetP of Corynebacterium glutamicum.

The high-affinity glycine betaine uptake system BetP, an osmosensing and osmoregulated sodium-coupled symporter from Corynebacterium glutamicum, was overexpressed in Escherichia coli with an N-terminal StrepII-tag, solubilized in beta-dodecylmaltoside and purified by streptactin affinity chromatography. Analytical ultracentrifugation indicated that BetP forms trimers in detergent solution. Detergent-solubilized BetP can be reconstituted into proteoliposomes without loss of function, suggesting that BetP is a trimer in the bacterial membrane. Reconstitution with E.coli polar lipids produced 2D crystals with unit cell parameters of 182A x 154A, gamma=90 degrees exhibiting p22(1)2(1) symmetry. Electron cryo-microscopy yielded a projection map at 7.5A. The unit cell contains four non-crystallographic trimers of BetP. Within each monomer, ten to 12 density peaks characteristic of transmembrane alpha-helices surround low-density regions that define potential transport pathways. Small but significant differences between the three monomers indicate that the trimer does not have exact 3-fold symmetry. The observed differences may be due to crystal packing, or they may reflect different functional states of the transporter, related to osmosensing and osmoregulation. The projection map of BetP shows no clear resemblance to other secondary transporters of known structure.

Chlorophyll b is involved in long-wavelength spectral properties of light-harvesting complexes LHC I and LHC II.

Chlorophyll (Chl) molecules attached to plant light-harvesting complexes (LHC) differ in their spectral behavior. While most Chl a and Chl b molecules give rise to absorption bands between 645 nm and 670 nm, some special Chls absorb at wavelengths longer than 700 nm. Among the Chl a/b-antennae of higher plants these are found exclusively in LHC I. In order to assign this special spectral property to one chlorophyll species we reconstituted LHC of both photosystem I (Lhca4) and photosystem II (Lhcb1) with carotenoids and only Chl a or Chl b and analyzed the effect on pigment binding, absorption and fluorescence properties. In both LHCs the Chl-binding sites of the omitted Chl species were occupied by the other species resulting in a constant total number of Chls in these complexes. 77-K spectroscopic measurements demonstrated that omission of Chl b in refolded Lhca4 resulted in a loss of long-wavelength absorption and 730-nm fluorescence emission. In Lhcb1 with only Chl b long-wavelength emission was preserved. These results clearly demonstrate the involvement of Chl b in establishing long-wavelength properties.

Two-dimensional crystallization of a membrane protein on a detergent-resistant lipid monolayer.

Two-dimensional crystals of a membrane protein, the proton ATPase from plant plasma membranes, have been obtained by a new strategy based on the use of functionalized, fluorinated lipids spread at the air-water interface. Monolayers of the fluorinated lipids are stable even in the presence of high concentrations of various detergents as was established by ellipsometry measurements. A nickel functionalized fluorinated lipid was spread into a monolayer at the air-water interface. The overexpressed His-tagged ATPase solubilized by detergents was added to the subphase. 2D crystals of the membrane protein, embedded in a lipid bilayer, formed as the detergent was removed by adsorption. Electron microscopy indicated that the 2D crystals were single layers with dimensions of 10 microm or more. Image processing yielded a projection map at 9 A resolution, showing three well-separated domains of the membrane-embedded proton ATPase.

Large scale expression, purification and 2D crystallization of recombinant plant plasma membrane H+-ATPase.

P-type ATPases convert chemical energy into electrochemical gradients that are used to energize secondary active transport. Analysis of the structure and function of P-type ATPases has been limited by the lack of active recombinant ATPases in quantities suitable for crystallographic studies aiming at solving their three-dimensional structure. We have expressed Arabidopsis thaliana plasma membrane H+-ATPase isoform AHA2, equipped with a His(6)-tag, in the yeast Saccharomyces cerevisiae. The H+-ATPase could be purified both in the presence and in the absence of regulatory 14-3-3 protein depending on the presence of the diterpene fusicoccin which specifically induces formation of the H+-ATPase/14-3-3 protein complex. Amino acid analysis of the purified complex suggested a stoichiometry of two 14-3-3 proteins per H+-ATPase polypeptide. The purified H(+)-ATPase readily formed two-dimensional crystals following reconstitution into lipid vesicles. Electron cryo-microscopy of the crystals yielded a projection map at approximately 8 A resolution, the p22(1)2(1) symmetry of which suggests a dimeric protein complex. Three distinct regions of density of approximately equal size are apparent and may reflect different domains in individual molecules of AHA2.

Projection structure and oligomeric properties of a bacterial core protein translocase.

The major route for protein export or membrane integration in bacteria occurs via the Sec-dependent transport apparatus. The core complex in the inner membrane, consisting of SecYEG, forms a protein-conducting channel, while the ATPase SecA drives translocation of substrate across the membrane. The SecYEG complex from Escherichia coli was overexpressed, purified and crystallized in two dimensions. A 9 A projection structure was calculated using electron cryo-microscopy. The structure exhibits P12(1) symmetry, having two asymmetric units inverted with respect to one another in the unit cell. The map shows elements of secondary structure that appear to be transmembrane helices. The crystallized form of SecYEG is too small to comprise the translocation channel and does not contain a large pore seen in other studies. In detergent solution, the SecYEG complex displays an equilibrium between monomeric and tetrameric forms. Our results therefore indicate that, unlike other known channels, the SecYEG complex can exist as both an assembled channel and an unassembled smaller unit, suggesting that transitions between the two states occur during a functional cycle.

Projection structure of the monomeric porin OmpG at 6 A resolution.

The Escherichia coli porin OmpG, which acts as an efficient unspecific channel for mono-, di- and trisaccharides, has been purified and crystallized in two dimensions. Projection maps of two different crystal forms of OmpG at 6 A resolution show that the protein has a beta-barrel structure characteristic for outer membrane proteins, and that it does not form trimers, unlike most other porins such as OmpF and OmpC, but appears in monomeric form. The size of the barrel is approximately 2.5 nm, indicating that OmpG may consist of 14 beta-strands. The projection map suggests that the channel is restricted by internal loops.

The 6.9-A structure of GlpF: a basis for homology modeling of the glycerol channel from Escherichia coli.

The three-dimensional structure of GlpF, the glycerol facilitator of Escherichia coli, was determined by cryo-electron microscopy. The 6.9-A density map calculated from images of two-dimensional crystals shows the GlpF helices to be similar to those of AQP1, the erythrocyte water channel. While the helix arrangement of GlpF does not reflect the larger pore diameter as seen in the projection map, additional peripheral densities observed in GlpF are compatible with the 31 additional residues in loops C and E, which accordingly do not interfere with the inner channel construction. Therefore, the atomic structure of AQP1 was used as a basis for homology modeling of the GlpF channel, which is predicted to be free of bends, wider, and more vertically oriented than the AQP1 channel. Furthermore, the residues facing the GlpF channel exhibit an amphiphilic nature, being hydrophobic on one side and hydrophilic on the other side. This property may partially explain the contradiction of glycerol diffusion but limited water permeation capacity.

The 3.7 A projection map of the glycerol facilitator GlpF: a variant of the aquaporin tetramer.

GlpF, the glycerol facilitator protein of Escherichia coli, is an archetypal member of the aquaporin superfamily. To assess its structure, recombinant histidine-tagged protein was overexpressed, solubilized in octylglucoside and purified to homogeneity. Negative stain electron microscopy of solubilized GlpF protein revealed a tetrameric structure of approximately 80 A side length. Scanning transmission electron microscopy yielded a mass of 170 kDa, corroborating the tetrameric nature of GlpF. Reconstitution of GlpF in the presence of lipids produced highly ordered two-dimensional crystals, which diffracted electrons to 3.6 A resolution. Cryoelectron microscopy provided a 3.7 A projection map exhibiting a unit cell comprised of two tetramers. In projection, GlpF is similar to AQP1, the erythrocyte water channel. However, the major density minimum within each monomer is distinctly larger in GlpF than in AQP1.

Mutant trimers of light-harvesting complex II exhibit altered pigment content and spectroscopic features.

Mutants of plant light-harvesting complex II (LHC-II) were produced by refolding the complex in vitro from bacterially expressed apoprotein and purified pigments by a method which yields native-like LHC-II in a single step. Amino acid residues known from the structure of the complex [Kühlbrandt, W., et al. (1994) Nature 367, 614-621] to bind chlorophyll (Chl) were replaced with nonbinding residues by site-directed mutagenesis. Recombinant monomeric and trimeric pigment-protein complexes were separated by density gradient centrifugation, and their pigment composition was determined. Six out of nine mutants formed trimers with Chl a:Chl b ratios and Chl contents which suggested they were lacking one Chl a or b per polypeptide. In this way, the identities of Chls a1, a2, a3, b5, and b6 were confirmed as Chl a or b, respectively, whereas Chl b3 in the structure was found to be a Chl a. Absorption and fluorescence emission spectra of the mutant lacking Chl a2 indicated a central role for this Chl in energy transfer to the reaction center.

Purification and two-dimensional crystallization of highly active cytochrome b(6)f complex from spinach.

The purification and two-dimensional crystallization of highly active cytochrome b(6)f complex from spinach is described. The preparation shows all spectroscopic characteristics of the pure complex. The electron transfer activity of 450+/-60 electrons per s is the highest in vitro activity reported to date. Using dimethyl sulfoxide (DMSO) as a solvent for the electron donor enhanced the performance and reproducibility of the assay. The high yield and the high activity of the protein make it an ideal candidate for biophysical and structural studies. Preliminary two-dimensional crystallization experiments yielded several different forms of two-dimensional and thin three-dimensional crystals, exhibiting varying degrees of order.

Analysis of macromolecular structure and dynamics by electron cryo-microscopy.

Electron cryo-microscopy has yielded a wealth of detailed new information on structures of biological macromolecules ranging from alphabeta-tubulin at 3.7 A resolution to hepatitis B virus at 7.4 A resolution, as well as a number of membrane proteins at 6-8 A resolution. Much of this progress was made possible by recent advances in instrumentation and image processing techniques.

Photosystem II.

Electron crystallography of photosystem II has revealed the location of important subunits and photoactive pigment molecules within this large membrane protein complex. It has also demonstrated a close evolutionary link among all types of photosynthetic reaction centres.

Projection structure of NhaA, a secondary transporter from Escherichia coli, at 4.0 A resolution.

Electron cryomicroscopy of frozen-hydrated two-dimensional crystals of NhaA, a Na+/H+ antiporter from Escherichia coli predicted to have 12 transmembrane alpha-helices, has facilitated the calculation of a projection map of NhaA at 4.0 A resolution. NhaA was homologously expressed in E.coli with a His6 tag, solubilized in dodecyl maltoside and purified in a single step using Ni2+ affinity chromatography. Two-dimensional crystals were obtained after reconstitution of purified protein with E.coli lipids. The projection map reveals that this secondary transporter has a highly asymmetric structure in projection. NhaA exhibits overall dimensions of approximately 38x48 A with a ring-shaped density feature probably corresponding to a bundle of tilted helices, adjacent to an elongated region of density containing several peaks indicative of transmembrane helices. Two crystal forms with p22121 symmetry show tightly packed dimers of NhaA which differ in the interactions between adjacent dimers. This work provides the first direct glimpse into the structure of a secondary transporter.